Grizzly Scalping Screen

Grizzly Scalping

Screens

Telsmith inclined grizzly scalping screens are most commonly used with an apron or pan feeder, ahead of the primary crusher, typically when excessive clay or an abundance of fines are present. With a rugged, heavy-duty design, Telsmith inclined scalpers handle the high tonnage and lump size required at larger primary crushing stations.

Specs

Benefits

Inquire

Key Specifications

grizzly scalping screens secondary image

Vibrating Grizzly Scalping Screens

Screen Size (W x L ft.)	Number of Decks	TL26 130mm	TL32 160mm	Dual TL26 130mm	Dual TL32 160mm	Grizzly Bar Sections
4' x 12'	1	X	X			2 @ 6'
	2	X	X			2 @ 6'
5' x 12'	1	X	X			2 @6'
	2	X	X			2 @ 6'
5' x 16'	1			X	X	3 @ 5'
	2			X	X	3 @ 5'
6' x 12'	1	X	X			2 @ 6'
	2	X	X			2 @ 6'
6' x 16'	1			X	X	3 @5'
	2			X	X	3 @ 5'
7' x 16'	1			X	X	3 @5'
	2			X	X	3 @ 5'

1) Optional grizzly bar spacing for 4" 5" and 6" openings are available. For openings larger than 6" consult factory.
2) Maximum recommended lump feed size is 42" (1067 mm).

Brochure: Vibrating Equipment

Benefits

Cross Members

Heavy fabricated cross members absorb the impact of large feed and form the basis for the grizzly support deck.
Huck Bolt Assembly

Eliminates welding on the side plates and the problematic stress concentrations that can result.
Feed Plate

Absorbs impact and extends grizzly bar life.
Deep Section Grizzly Bars

Allow up to 6" nominal spacing without interference from cross members. A variety of spacing options are available upon request.